Shop by implant brand
Prosthetic components for dental implants by brand. We offer IPD compatible components for more than 250 platforms and dozens of implant systems.
Most frequently searched: Astra, Straumann, Camlog, Neodent, Megagen, Alpha Bio Tec, Nobel Biocare, Osstem.
INNO®, DIO®, Dentis s-Clean and Neobiotech® IS-III
When similar internal geometry is not enough for safe selection: platform → one verified IPD series → scan body → Ti-base → analog → screw → CAD/CAM library.
Found:
Quick system selection (A–Z)
Click a tile to jump to the corresponding brand in the list below.
Item counts are based on the current import. One IPD series may be compatible with several commercial implant-system names.
Ranges / series
Alfa Gate®
Alpha Bio Tec™ IH
Astra®
- Evolution® Ø3.0
- Evolution® Multiunit Ø3.0
- Evolution® Ø3.6
- Evolution® Multiunit Ø3.6
- Evolution® Ø4.2
- Evolution® Multiunit Ø4.2
- Evolution® Ø4.8
- Evolution® Multiunit Ø4.8
- OsseoSpeed™ Tx Ø3.0
- OsseoSpeed™ Tx Ø3.5/4.0
- OsseoSpeed™ Tx Ø4.5/5.0
- OsseoSpeed™ Tx MULTIUNIT Ø3.5/4.0
- OsseoSpeed™ Tx MULTIUNIT Ø4.5/5.0
Bego®
BioHorizons®
Biotech®
BTI®
Biomet-3i®
Bredent® Blue Sky™
Camlog®
Dentium®
Dentis
Euroteknika ETK
Geass®
Global D®
Inno
Medentis®
Microdent®
MIS®
Multi-Unit abutments
Neobiotech
Neodent®
Implant Direct®
Nobel Biocare®
- Branemark System® Ø3.5
- Branemark System® Ø4.1
- Branemark System® Ø5.1
- Branemark System® Multiunit Ø4.8
- Nobel Replace® Select Tri-Channel® Ø3.5
- Nobel Replace® Select Tri-Channel® Ø4.3
- Nobel Replace® Select Tri-Channel® Ø5.0
- Nobel Replace® Select Tri-Channel® Multiunit Ø3.5
- Nobel Replace® Select Tri-Channel® Multiunit Ø4.3
- Nobel Active® Replace CC® Ø3.0
- Nobel Active® Replace CC® Ø3.5
- Nobel Active® Replace CC® Ø4.3
- Nobel Active® Replace CC® Multiunit Ø3.5
- Nobel Active® Replace CC® Multiunit Ø4.3
Oktagon® Implant System
Osstem®
Phibo®
PSD Locators®
Southern Implants®
Straumann®
Sweden & Martina®
Zimmer®
Galimplant®
The current register contains 18 items.
View components →Neoss
The current register contains 6 items.
View components →Osteoplus®
The current register contains 3 items.
View components →Thommen Medical
The current register contains 15 items.
View components →Alfa Gate®
Alpha Bio Tec™ IH
Astra®
- Evolution® Ø3.0
- Evolution® Multiunit Ø3.0
- Evolution® Ø3.6
- Evolution® Multiunit Ø3.6
- Evolution® Ø4.2
- Evolution® Multiunit Ø4.2
- Evolution® Ø4.8
- Evolution® Multiunit Ø4.8
- OsseoSpeed™ Tx Ø3.0
- OsseoSpeed™ Tx Ø3.5/4.0
- OsseoSpeed™ Tx Ø4.5/5.0
- OsseoSpeed™ Tx MULTIUNIT Ø3.5/4.0
- OsseoSpeed™ Tx MULTIUNIT Ø4.5/5.0
Bego®
BioHorizons®
BTI®
Biomet-3i®
Bredent® Blue Sky™
Camlog®
Dentium®
Dentis
DIO®
Dentsply®
Euroteknika ETK
Geass®
Global D®
Inno
Medentis®
Megagen®
Microdent®
MIS®
Multi-Unit abutments
Neobiotech
Neodent®
Implant Direct®
Nobel Biocare®
- Branemark System® Ø3.5
- Branemark System® Ø4.1
- Branemark System® Ø5.1
- Branemark System® Multiunit Ø4.8
- Nobel Replace® Select Tri-Channel® Ø3.5
- Nobel Replace® Select Tri-Channel® Ø4.3
- Nobel Replace® Select Tri-Channel® Ø5.0
- Nobel Replace® Select Tri-Channel® Multiunit Ø3.5
- Nobel Replace® Select Tri-Channel® Multiunit Ø4.3
- Nobel Active® Replace CC® Ø3.0
- Nobel Active® Replace CC® Ø3.5
- Nobel Active® Replace CC® Ø4.3
- Nobel Active® Replace CC® Multiunit Ø3.5
- Nobel Active® Replace CC® Multiunit Ø4.3
Oktagon® Implant System
Osstem®
PSD Locators®
Southern Implants®
Straumann®
Sweden & Martina®
Zimmer®
Galimplant®
Current register of compatible components for Galimplant®.
View components →Neoss
Current register of compatible components for Neoss.
View components →Osteoplus®
Current register of compatible components for Osteoplus®.
View components →Thommen Medical
Current register of compatible components for Thommen Medical.
View components →Alfa Gate®
Alpha Bio Tec™ IH
Astra®
- Evolution® Ø3.0
- Evolution® Multiunit Ø3.0
- Evolution® Ø3.6
- Evolution® Multiunit Ø3.6
- Evolution® Ø4.2
- Evolution® Multiunit Ø4.2
- Evolution® Ø4.8
- Evolution® Multiunit Ø4.8
- OsseoSpeed™ Tx Ø3.0
- OsseoSpeed™ Tx Ø3.5/4.0
- OsseoSpeed™ Tx Ø4.5/5.0
- OsseoSpeed™ Tx MULTIUNIT Ø3.5/4.0
- OsseoSpeed™ Tx MULTIUNIT Ø4.5/5.0
Bego®
BioHorizons®
Biotech®
BTI®
Biomet-3i®
Bredent® Blue Sky™
Camlog®
Dentium®
Dentis
Euroteknika ETK
Geass®
Global D®
Inno
Medentis®
Microdent®
MIS®
Multi-Unit abutments
Neobiotech
Neodent®
Implant Direct®
Nobel Biocare®
- Branemark System® Ø3.5
- Branemark System® Ø4.1
- Branemark System® Ø5.1
- Branemark System® Multiunit Ø4.8
- Nobel Replace® Select Tri-Channel® Ø3.5
- Nobel Replace® Select Tri-Channel® Ø4.3
- Nobel Replace® Select Tri-Channel® Ø5.0
- Nobel Replace® Select Tri-Channel® Multiunit Ø3.5
- Nobel Replace® Select Tri-Channel® Multiunit Ø4.3
- Nobel Active® Replace CC® Ø3.0
- Nobel Active® Replace CC® Ø3.5
- Nobel Active® Replace CC® Ø4.3
- Nobel Active® Replace CC® Multiunit Ø3.5
- Nobel Active® Replace CC® Multiunit Ø4.3
Oktagon® Implant System
Osstem®
Phibo®
PSD Locators®
Southern Implants®
Straumann®
Sweden & Martina®
Sterilisation of IPD prosthetic components
All prosthetic components IPD are supplied non-sterile. Sterilisation is required before use in the patient’s oral cavity and is the responsibility of the treating clinician.
Recommended protocol according to UNE-EN ISO 17665-1:2007:
- autoclave 134 °C / 5 min, or
- autoclave 121 °C / 30 min + drying 30 min
Components are cleaned during production, but are not supplied sterile.
Support for dozens of systems – Ti-bases, Multi-Unit, screws, copings and libraries for exocad, 3Shape, Dental WingsDistribution: Exklusiv Dent s.r.o.
Sterilisation of IPD prosthetic components
IPD components are supplied non-sterile. Sterilisation before use is carried out by the treating clinician.
- Autoclave 134 °C / 5 min
- or autoclave 121 °C / 30 min + drying 30 min
According to UNE-EN ISO 17665-1:2007.
Resources (software libraries, guides, technical sheets, catalogue…)
Quick access to IPD digital workflows, libraries, guides and catalogues.
IPD Digital Workflows
Overview of IPD digital workflows for CAD/CAM.
IPD Digital Libraries
Libraries for Exocad, 3Shape, Dental Wings…
IPD Scan Bodies
Scan bodies & workflow accuracy.
IPD Scan Transfer
Transfers for accurate position transfer.
ModelPro CAD SW
STL modelling, articulators and model management.
Compatibility identification tool
Quick verification of the correct connection.
Fixation-screw technical specifications
Materials, coatings and torques.
Guide – Abutments & accessories
Assembly, recommendations and maintenance.
Guide – Laboratory instruments
Correct laboratory procedures.
Guide – Adjustable torque ratchet
Torque setting and calibration.
IPD Catalogue
Complete product range.
IPD brochure
Concise overview of key solutions.
EXOCAD – IPD SW LITE
LITE user guide.
EXOCAD – IPD SW TECH
Advanced functions and tips.
EXOCAD – Temporary abutments
Workflows for provisional solutions.
3Shape – IPD SW LITE
3Shape LITE guide.
3Shape – IPD SW TECH
Advanced libraries and workflows.
3Shape – Temporary abutments
Settings and recommendations.
Frequently asked questions when selecting by brand
Practical answers for safe selection of a compatible IPD product branch.
Why is the implant brand alone not enough when selecting a prosthetic component?▾
One brand may include multiple systems, diameters and prosthetic platforms with different geometries. Safe selection therefore requires at least the specific system and platform, and often also the gingival height and indication.
What does a two-letter IPD series such as DB, OB or UB mean?▾
An IPD series is an internal product branch grouping components intended for a specific compatible interface or system. Once the platform has been verified, it is advisable to keep the scan body, Ti-base, analog, screw and library within the same verified branch.
What do NP, RP, WP, NC or RC designations mean?▾
These are prosthetic-platform designations used by different manufacturers. Their meaning is not universally interchangeable across brands. Always interpret them in the context of the specific implant system.
Can I combine a scan body from one IPD series with a Ti-base from another?▾
Not based on geometric similarity alone. The digital workflow must use components and library references verified as one compatible assembly for the specific platform.
What is the best way to identify an unknown implant before selecting a component?▾
The most reliable source is the implant label, implant passport or original documentation showing the manufacturer, system, diameter and platform. If the information is unavailable, send us the documentation you have for individual verification.
What if I cannot see my implant system in the list?▾
The list is a navigation layer over the current import, not proof that no solution exists for another system. Contact us with the exact implant name or label and we will verify compatibility.
Are IPD components original components from the implant manufacturer?▾
IPD manufactures its own compatible prosthetic components. Implant-brand names on the website are used to identify compatibility; they do not imply that the component was manufactured by the original implant manufacturer.
Where can I find a more detailed guide for INNO®, DIO®, Dentis s-Clean and Neobiotech® IS-III?▾
A separate multi-system guide is available for these systems. It explains the difference between similar geometry and a genuinely verified product branch and links the scan body, Ti-base, analog, screw and CAD/CAM library.